it returned today but in a slightly different order. both front windows, driver seat, side mirrors.....both rears still work as does the alarm.
so i understand, the CAN bus is under the passenger mat. you would isolate one module at a time by d/c one wire then reset the battery and once you get the correct one d/c/isolated the problem will NOT return?
how does one know which wire corresponds to what module?
thanks
g
Quote:
Originally Posted by Hirnbeiss
Going from memory, but the problem may still recur if you didn't get the correct module.
The way I isolated the culprit (it was a rear window module) was to find the CAN hub under the front passenger A-pillar. Then I would disconnect one wire to a module, do a battery disconnect reset, then drive around a few days until the problem recurred or not.
|