|
In job # 7.3-1603 'Testing fuel pressures and internal leaktightness'
On a 103 engine, and assuming that this applies to your 1.6 which I'm almost certain it does.
The article reads:
"5. Check control plunger in fuel distributor for leaks. Briefly press air flow sensor plate (84) down fully and hold tight in this position; a a slight leak quantity is permissible when this is done."
SO, if this is what you're doing, then the small fuel you see coming out is OK!
Good luck 
__________________
-Paul-
'01 E430, Sport 72,000 mi
'98 C280, 126,500 mi
|