Hi Stretch, yes there are 4 bolts that hold the seat rails to the floor pan, I have access to the rear 2, but cannot access the front two due to the seat positioned over the front rails. I cannot access the seat motor harness to try to apply 12v to the motor directly to see if the motor is bad or to move the seat to access the front rail bolts.

Assuming worst case scenario, where the motor is bad, how can I remove the seat in this situation?

Can the fore/aft motor (I believe it is the middle of 3 motors in the motor pack under the seat) be removed from the seat track? If so would this disengagement allow me to manually move the seat along the tracks, or is there something that I need to also disconnect?

__________________
Stable Mates:
1987 300TD 310K mi (Hans)
2008 Jeep Grand Cherokee OM642 165k mi (Benzrokee)