Quote:
Originally Posted by dafman
Okay, thank you. Does that wire normally go into the glow plug relay box along with the glow plugs? Is there another temperature sensor (kind of hard to see, look in the eye of the dip stick)?
Thank you,
Vincent
|
The early pencil type glow plug system had a temp sensor that goes to the cylinder head. I can't remember if it is a separate temp sensor from the coolant temp sensor for the gauge or not.
The later versions have the temp sensor built inside of the Glow Plug Relay and no temp sensor on the head.
Look in the service manual.
W123 Service Manual
https://www.startekinfo.com/StarTek/outside/12265/?requestedDocId=12265
CD1
http://mb.bolinko.org/15/w123-mainmenu-50/w123-dokumentacja-cz-1-mainmenu-59.html
CD 2
http://mb.bolinko.org/15/w123-mainmenu-50/w123-dokumentacja-cz-2-mainmenu-83.html