Robert, Did you get it figured out 8 years ago?

For anyone else, I flowed my system with plastic bottles under the injectors and adjusted the distributor to match the flow rates. I think the entire write up is on this site. The fuel lines bend enough to allow this, but be careful nonetheless. Doing it any other way might lead to unmatched fuel delivery.

Mechanical injectors can be cleaned with carb clean and compressed air with a rubber tipped nozzle. That is also a good way to check the break pressure. Just keep turning the regulator up until the injector opens. What's spec? About 30 psi? Anyway, if yours are clogged, a bit of carb cleaner and 100 psi at the nozzle will clean them up.

QUESTION: How long does it take to remove the tank and what tools come in handy? I need to grab one from a junkyard this weekend.