The top part of the manifold does come out before you "get access." That's a joke and you'll get it if you actually pull off the job. The spark plug connectors most likely will not want to come out too. Don't be surprised if you need to replace some due to removal damage.

Don't recall doing a 166 specifically because I try to avoid working on MLs like the plague but I'd avoid pulling the center firewall panel at all costs.

__________________

90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff