Quote:
Originally Posted by BWhitmore
Metric Motors has a good reputation. You can ask to have the head magnafluxed to check to insure that the weld repaired the crack properly. The magnafluxing should be done at their expense.
|
Quote:
Originally Posted by blackmerc
Thanks for your help.In principle, then, a weld in the head is OK? Should I expect to see higher compression in that cylinder?
|
Magnafluxing is a magnetic particle inspection process for ferrous metals.
The cylinder head in question is aluminum; the inspection process for non-ferrous metals is called Zyglo (sp?).
A 1cc change in chamber volume is not significant.