Put new lines in today. Last thing i need is a new pickup sensor/cable because the one i have it gone. Reading of 85 Ohms resistance and according to Pierre Hedary anything over about 70 ohms is where failure starts to occure
https://www.youtube.com/watch?v=5glxTyJbgTo
So, I test fitted a blue wire through the firewall along side the standard..
cut what i needed from the plug with as much lead as possible
figured out the wiring.
put a fuse in on the positive line, used a 15Amp fuse, which i think needs to be replaced for a much smaller one..
I think i should put a fuse on the " signal" line as well, not sure.
So yeah, it's time to get a new pickup wire. the grey one that goes to the front of the engine that picks up the signal.
the part number code for it is A 001 153 83 28 for anyone needing it for future reference.