|
Anyone know where to find a wiring diagram for this? If I could find a complete one this would be much easier.
As for what happened exactly it started and ran one night, then a few days went by and I decided to pull the column, no changes to the wiring other than disturbing it so something may have been grounded when it shouldn't. I went to start it and it didn't even want to crank so I jiggled the starter hot and both wires from the battery. I had a crank no start issue. I checked all the fuses and the 50A one on the K40 relay under the hood was blown. With that replaced no change.
I have the basic key with the key ring and the module in the dash.
If there is no immobilizer issue then something else is causing the injectors to not work.
|