Quote:
Originally Posted by tdoublenastywitit
Man u guys are getting bored on here ... First I read someone is cutting up oil filters and taking pix of the inside and now I'm reading probably the 1000th Valve wrench thread.
Take a berzo torch heat up a 14mm and bend it .....
|
People on the forum have various skill levels and various tools an equipment.
I have a sturdy work bench with a Vice mounted on it, an Arc Welder (working in a welding shop was my first real job at 17 years old)and of course the propane torch.
What would I do to bend a wrench without a Vice? It gets a whole lot more difficult without the vice and something to mount the vice on. Impossible no; but for someone who has never heated up any piece of medal red hot and bent it can be a huge challenge.
The other issue is what angle to bend them. I already had a set of Hazet Wrenches to use as a pattern.
So what these threads are about is advice and the differing ways people did it and the differing problems people might have and what to do about that.
Then there is also the social aspects of communicating with someone about something they are interested in. When I see a subject I am not interested in I simply don't look.
As an example people that like to Fish can talk about that forever. I don't eat Fish and I don't fish so I would likely run away from a bunch of people talking about fishing.