View Single Post
  #9  
Old 09-16-2019, 12:08 PM
ah-kay ah-kay is online now
Registered User
 
Join Date: Mar 2009
Location: San Diego
Posts: 3,597
This is my experience on the om603 engine. I don't think you have a crack head. Cracked head will overheat big time. This is what I would do. Need to determine the health of the engine in general.

1) run the car until the upper radiator hose is rock hard, making sure there is no overheating. If it doesn't get hard then the cooling system has a leak. Leave it overnight and squeeze it. If it is still rock hard then there may be a gasket leak.

2) remove all injectors and pop test them. Making sure the spray pattern and open pressure is ok.

3) check compression while engine still hot. However, I find hot and cold engine doesn't make a whole lot of difference.

4) turbo leaking oil will give white smoke. Lot and lot of it, like a chain smoking machine.

5) loud engine noise is subjective. Take the serpentine belt off and listen again.

6) check blowby by removing oil cap. You should feel cap is sucked in, a negative pressure vacuum feel caused by the turbo. If it is positive pressure then bad blowby.

Good luck.
__________________
Not MBZ nor A/C trained professional but a die-hard DIY and green engineer. Use the info at your own peril. Picked up 2 Infractions because of disagreements. NOW reversed.

W124 Keyless remote, PM for details. http://www.peachparts.com/shopforum/mercedes-used-parts-sale-wanted/334620-fs-w124-chasis-keyless-remote-%2450-shipped.html

1 X 2006 CDI
1 x 87 300SDL
1 x 87 300D
1 x 87 300TDT wagon
1 x 83 300D
1 x 84 190D ( 5 sp ) - All R134 converted + keyless entry.
Reply With Quote