Thread: Removing the 30mm transmission output flange/yoke nut correctly.
View Single Post
  #7  
Old 10-08-2019, 04:21 PM
dmorgan dmorgan is offline
newbie
  
Join Date: Apr 2012
Posts: 464
Click image for larger version Name: P1010002_14.jpg Views: 191 Size: 246.8 KB ID: 154413

Click image for larger version Name: P1010012_6.jpg Views: 147 Size: 269.6 KB ID: 154414

Click image for larger version Name: P1010013_6.jpg Views: 121 Size: 317.7 KB ID: 154415

Click image for larger version Name: P1010014_6.jpg Views: 158 Size: 240.0 KB ID: 154416

Click image for larger version Name: P1010015_6.jpg Views: 189 Size: 243.1 KB ID: 154417Zulfiqar, thanks for your feedback. I appreciated it.

I finally got the rear transmission case housing removed. The reason for the case housing would not move is because there is a 3/4 inch bolt on the right side facing me that needed to be remove. Sure enough the case housing came loose with a little prodding. See pictures below:
Reply With Quote