Quote:
Originally Posted by shertex
Well this was a new one in my experience....was measuring the ATF level on the 98 and the plastic tip of the 722.6 measuring tool came off and is stuck in the tube!  About 3" down. I don't imagine it would be a good idea to push it through and have it live in the pan until the next filter change. So, what, just remove the tube and get the piece out? |
Tough choice. I don't think the plastic tip is going to get passed the Filter but if it floats there might be something it could get between.
I can't remember what it takes to pull the dipstick tube on mine. Look that up and you can decide if you want to pull the tube and poke out the obstruction. I think you will loose some fluid if you pull the tube out.