not done, but new axles are in, using cheapos until i can get to my rebuilder, which will be a while -- note, solution to reusing old spacers on these new axles is not to buy thinner spacers -- they are the right thickness, just need to enlage the inner whole of the spacer, to avoid the "lip" on the new axle, and sit flush, rather than proud -- then circlips are a correct, snug fit
also would seem easier to clear the hub when removing axles to first remove diff mount so it can be raised to maximum -- since it has to come off anyway

__________________
78 240d: Mona
81 240D: Lola
77 toyota chinook: Carlito
93 chevy k1500: Cowboy