|
it is not easy to troubleshoot headlight leak without photos and clearer
understanding of the point of entry for the water. solving condensation
entry requires different tact vs rain or car wash droplets. how the water pooled
makes a difference as well.
if the lens bonding is confirmed using cement, that is different vs gray butyl
rubber (thermal compliant) sealant which is usually heated to soften, then the
lens pried out. the butyl sealant can be reused ... and even replenished with
more to create a better seal. it can be molded using heat from your fingers
to a rope-like shape and stuffed into the channel between lens and headlight IF
this is what your headlight uses already. if so, i can send you some once you
verify it matches what is in your headlight now
for the outside seam (presuming that is the weakness which can be patched
without removing headlight), basic bathtub sealant can be used (photo)
__________________
-- raymond~
47º 34'N 122º 18'W
|