I forgot to mention that you must first take off your steering wheel. Before you start, center the wheel so that you can put it back on in the same place.

Pry out the plastic plug in the center of the wheel. Get a 17 mm (I think) socket with an extension and remove the nut inside the wheel. My whell slid off w/o any trouble. You might have to tap your's from the back if it sticks.

When you put the wheel back on put a piece of crumpled paper or a rag in the socket so that it will keep the nut from sliding up into the socket when you try to stab the nut on the shaft. You can't get your fingers inside the wheel so you have to put the nut in the socket and then tip it down the hole.