Quote:
Originally posted by WowS500
Oil numbers:
Oil weight, or viscosity, refers to how thick or thin the oil is. The temperature requirements set for oil by the Society of Automotive Engineers (SAE) is 0 degrees F (low) and 210 degrees F (high).
Oils meeting the SAE's low temperature requirements have a "W" after the viscosity rating (example: 10W), and oils that meet the high ratings have no letter (example SAE 30). An oil is rated for viscosity by heating it to a specified temperature, and then allowing it to flow out of a specifically sized hole. Its viscosity rating is determined by the length of time it takes to flow out of the hole. If it flows quickly, it gets a low rating. If it flows slowly, it gets a high rating.
|
so 5w30 oil will operate at a lower temperature than a 10w30 oil? and does that mean that a lower number before the "W" means that it is thinner?
also what does the number after the "W" mean?
also for certain brands, like Rotella T, i only see it in 10W30. do they make other weights for that brand?
thanks for taking the time to educate me.
my dad once taught me but i forgot. in Alaska we did an experiment when the temp was about -40 outside. we put several oils in a jar and see how they turned out. some turned i'd like to say solid until you poke it. fully synthetic had some goo in its texture too.