|
Hopefully this re-soldering will cure your problem. Did you neutralize the acid that you used on the board by throughly spraying the board with a electronic "tuner cleaner"? Available from Radio Shack or any good electronics supplier. As you have a serious humidity problem, I'd give the board a protective spray with something like clear Krylon, but shield the working relay contacts when you do. Good luck!
__________________
'76 240D-Sold
'78 240D-Sold
'85 300 SD, 165K-Sold
'88 300 TE, 165K-Sold
'64 Porsche 356C Cabriolet- under restoration
'86 560SL 124K Miles-Sold
'94 320E Wagon, 74K Miles-128K Miles JUNKED
'06 E350 Wagon, 84K Miles
07 SL550, 14K Miles
|