Quote:
Originally Posted by chris380sl
ok No power at both ends of fuse 12.
|
That's weird. check if you have voltage at connector C105
page 2:
https://www.startekinfo.com/StarTek/outside/11883/PROGRAM/ETM/83etmComp.pdf
Quote:
Originally Posted by chris380sl
no continuity on hazard switch between 15 and 49
|
if you don't have continuity with the switch on or off then you need a new switch.
Quote:
Originally Posted by chris380sl
I think without continuity in the hazard switch 12 doesnt get hot.
|
fuse 12 should have battery voltage regardless of the hazard switch. Even if you remove the switch completely the fuse 12 should have voltage