Ok. There may be a bigger issue here.
The two pods, that are used for the fresh air flap which are activated by the ECON button, are currently extended out ward when the HEVAC system is OFF and the flap door is closed. When I select ECON the pods retract pulling the bars controlling the vent flap thereby opening the flap about 30 degrees or 3”. When I turn off the HEVAC, or the 0 button, the pods extend and push their respective bar controlling the vent flap thereby closing the fresh air flap.
It seems from the videos Ive been watching about this HEVAC system and these particular pods, that mine are reversed from proper operation. My pods are extended when OFF is selected on HEVAC (the fresh air flap being closed) and retract when ECON is pressed (opening the fresh air flap) whereas in the video when the HEVAC is OFF the pods are retracted and when the ECON button is pressed the pods extend outwards and open the fresh air flap.
My question is, was I supposed to physically set the fresh air vent door to a position so that when I am connecting the Pods to the vent door control arms both Pods will be depressed inwards as a starting position?
My hoses “appear” to be plumbed correctly with the red air hose feeding to the most rearward air fitting on the pods and the green hoses to the most forward.....

https://www.youtube.com/watch?v=0SU6CFb0W7s

Forward to 1:05:16 To see what I am talking about.

Suggestions?