|
I must have jinxed my 2008 E320 as I have not yet replaced the fuel hoses at the filter and now I need to...I did the hoses on the 2008 ML320 and thought I had done both 2008s. Went to change the filter on the E320 and now its inlet hose is weeping.
Here are the parts you will need if you end up doing this. Sorry for the crappy formatting, this forum software suxx:
All parts in the EPC - Engine group/07 Fuel Injection/110 Fuel Filter, Lines
Item Qty Needed Part Number Description
10 Qty 1 A 642 078 12 81 Fuel Hose, Feed Line from Connecting Point to Filter
20 Qty 2 A 004 997 20 90 Hose Clamp, to mount fuel lines 14.5-15.5 mm
30 Qty 2 A 006 997 18 90 Hose Clamp, to mount fuel lines 13-14.5 mm
230 Qty 1 A 642 070 02 81 Fuel Line, Fuel filter to High Pressure Pump
__________________
The OM 642/722.9 powered family
Still going strong
2014 ML350 Bluetec (wife's DD)
2013 E350 Bluetec (my DD)
both my kids cars went to junkyard in 2023
2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles)
2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles)
1998 E300DT sold to TimFreeh
1987 300TD sold to vstech
|