Ok so far I have power to my relay and it is closing contact but using my power probe sending power directly to the pumps they would not run so I went under and both pumps were stuck, I got one free and making pressure just for testing purpose. Using power probe I’m still not getting power back to the pumps. I’ll get my girlfriend probe the relay plug while I check at the pumps for power. BUT NOW!!! With the pump being powered directly and pressuring up I’m not getting fuel to my injectors from the jetronic system. The start injector circuit is flowing but none of the rest of the lines are. I’m not entirely sure how this Fuel system operates, if you have a manual or could take the time to explain it to me it would be greatly appreciated.