O.k.... Rebuilt the compressor, new condensor (pinhole in it), new dryer, new expansion valve, new switches in dryer, all new o-rings in system, vacuum for 8 hours, 8oz. of mineral oil, 1/4 oz. of u.v. dye, and proper charge of r-12. Run a/c in min. on climate control and vent temp only goes down to 55 deg. Checked mono valve, ok, hotwire clutch goes right down to low 30's. Removed evap. temp. sensor from air box and left it plugged in clutch stays in. got a new one from dealer no difference, clutch still cycles on and off starting at 60 deg. vent temp?
Like I said, the system gets very cold if the compressor stays on, low 30's, but it's got to cycle or it will freeze up for sure.
Thanks for the input!!
I posted this on tech help and got no responce.
I feel this is an electrical problem with the clutch.