I will give that a try in a day or to thanks for the advice. I have been reading through the instructions and had a couple questions
1.
"3) Detach the purge line at the electric switchover valve and seal. On my car, this valve is mounted on the inner wall of the left fender, adjacent to the ABS controller. The subject line is black tubing with white stripes".

I cant seem to find the switchover valve is that the correct name of the part i should be looking for? I attached a picture of what it may be but im not sure.

2.
"1) Idle Contact: Deflect the air flow sensor plate. The duty cycle should decrease to 10%. If it remains at 70% test the throttle valve switch (Job 07.3-121)"
What is the definition of deflect here? Judging by the next line being

"2) Full Load Contact: Open the throttle completely. The duty cycle should decrease to 20%. If it only decreases to 40% test the air flow sensor potentiometer (Job 07.3-121)."

does deflect mean to just push it down slightly and open throttle completely means to push it down all the way? I would think throttle would mean throttle linkage but that would have no affect on the airflow plate if the engine is not running?

https://gyazo.com/a59706e40036035f6dd7172216baf59a