Quote:
Originally Posted by Diseasel300
I use an old Lisle pickle fork on my cars to change the tie rod ends. No idea what size it is supposed to be, but the opening at the narrow end of the forks is 23mm and tapers down to 19mm towards the shaft. I can't imagine ever using anything smaller for any application.
|
Thanks guys for the info. There is a 15/16" fork. Maybe I will get one of those. Others say I should get the scissor type joint separator. But for my one-off job thought I would try the pickle fork.
__________________
Graham
85 300D
,72 350SL, 98 E320, Outback 2.5