So I'm working on it right now. It has no marks of any type on the front timing cover, or pulley. Just smooth..

Set the ip mark to the top left screw head center 10 o'clock

I noticed around tdc on the bellhousing there is a small hole in a window. Spun it around many times , only one hole can be seen. I think thats my mark? Either way I'm gonna try it. The book shows two spots on the flywheel. I'm bettin on just being able to see the right one..

Also I hooked all of the injectors up, out side of the engine. They all work, and spray perfectly. Not one drip! I'm certain they have ben apart before...

I'll grab the camera, and see what happens!