Hey Gang! I finally installed a Alt (180W) and it is producing a solid 13.8v with the engine running. We test drove the car enough to learn the shifting has not been restored. From a standing start, it is either shifting from 1-2 or 2-3. but it shifts no higher. At roughly 40mph it is turning at ~4000rpm. I was considering replacing the conductor plate & then wondered if there is a test for the solenoids or if I should just plan on replacing them all? Or maybe they can be cleaned and restore them? Also, are the Solenoids all the same or is there a different one for each function? Thanks again for everyone's suggestions & comments! btw, The codes my $100 reader finds P0016 & P0017 which both relate to cam components which I am familiar with. But no transmission codes. I plan to take it to my Indy to see if his monster reader will find add'l codes...