Quote:
Originally Posted by imgolden
I have a friend that is currently working on fabricating a quality solution to this issue (Dutch, same fellow making the pivot mount balls, bless him). But, it seems like it will be a while.
|
The issue with whole new construction is the line end fittings. See attached picture.
However the check valve and a fitting for the 2 little nipples and rubber hose could be provided and the owner could remove the plastic hose/tubing themselves and replace it with the rubber hose.
Another way would be to cut the plastic hose/tubing as close as possible to the stock Check Valve Assembly and use rubber sleeves to attach the new check valve and nipples. That leaves most of the plastic line/hose intact.