|
I just rebuilt one of the brush holders on my fan with JB Weld. If you find a car with a damaged front end they should sell you a "broken" fan for really cheap. My guess is tha the backend of the fan should be in goood shape even if the car was smacked pretty hard in the front...
The brushes should smoothly push in and spring back on the springs. They seem to be adjusted nominally level to the top of the brush holders when new and fully compressed. A little solder and you can replace them with no problems.
__________________
'99 S420 - Mommies
'72 280SE 4.5 - looking to breathe life into it
'84 300SD Grey - Sold
'85 300SD Silver - Sold
'78 Ski Nautique
|