05-30-2022, 07:22 PM
|
 |
Registered User
|
|
Join Date: Oct 2006
Location: California
Posts: 2,167
|
|
Quote:
Originally Posted by 3DawgDoug
The adjusting screws have not been touched. The cover screws and seals have been removed. There is no adjustment to them that I can find.
I did note the alignment of the slot in the plunger adjustment/retainer screw (hope I used the correct term) before removing the plunger. It should come back to the setting as found.
|
https://k-jet.biz/wp-content/uploads/2019/06/Rebuilding-a-Cast-Iron-K-Jet-Fuel-Distributor-V2.pdf See if this helps.
__________________
1990 190E 3.0L
|