[QUOTE]Originally posted by Jack500
[B]Update. I cleared codes 2,5,8 &17 from the emissions module (LED/switch). However I could never get the two flashes confirming that all was clear. When the switch was held for the necessary 3-4 seconds and released the LED remained blank. The CE light remained on when starting the engine.

DM will not give a OK flash [ single, NOT double] until the DM has checked ALL systems [ many drive cycles]

With the LED tool I went ahead and checked pins.

Pin 8 read 1 (clear).
Good

Pin 14 read 5. I cleared.
Stop lamp switch [ wait to see if re-appears]

Pin 10 would not give any signal not even 1.
nothing there

Pin 7 read 1 (clear)

Pin 6 read code 8 and I am unable to clear it.
SRS system .that should be a digital sig from 94/95

Upon restarting engine the CE light is off. I have not driven enough to see if it will come back on.

Fine , watch it for new codes he CE will not go OUT after code retrieval until you turn key off for 10 sec and then restart car]