Quote:
Originally Posted by KJ_Ghukasian
My money's on the sway bar being excessively worn on the outer bushing side, but I'm very curious about your suggestions before I go sourcing a new sway bar or smaller diameter bushings (if I remember correctly, there are several diameters. The ones I currently have on the vehicle are VIN appropriate). Any help is greatly appreciated.
|
KJ:
Consider disassembling the sway bar & bushings enough to lubricate the bushings, both the ID and the surfaces of the bushing in the clamps.
Use glycerine or a rubber lube such as Ru-Glide. If the bushings are the source of the noise, the lube should give, at the least, a temporary reprieve.