Thread: 103 Intake & Exhaust Manifold Specs
View Single Post
  #2  
Old 06-29-2003, 07:19 PM
Kyle Blackmore's Avatar
Kyle Blackmore Kyle Blackmore is offline
Mostly Harmless
  
Join Date: Sep 2001
Location: almost beyond Hope...B.C.
Posts: 971
Ok, all the bolts are out and its holding on by the stud in the center and the support brackets , am I going to be able to seperate the intake and head as I lift the head off or ?? The stud in the center can't be easily removed so I'm hoping someone who's done this can give some direction here,I'm going to go back into the shop and work on removing all the top end stuff. I'll check back in while , TIA.
__________________
Democracy dies in darkness, you have to kick at the darkness till it bleeds daylight
Reply With Quote