View Single Post
  #7  
Old 06-12-2023, 09:27 PM
cmac2012's Avatar
cmac2012 cmac2012 is online now
Me, Myself, and I
 
Join Date: Dec 2004
Location: Redwood City, CA
Posts: 38,882
Quote:
Originally Posted by qualified-merc View Post
Two things concerning oil; one, change oil hot and change often. A bypass oil filter can filter down to 1/10th of a micron which helps to keep dirt and other particles filtered out of the oil; a good thing. Even with a bypass filter, I feel that oil should be changed at a minimum every 10,000 miles.

Also, there are several pre-charging systems on the market that are worth investigating. These pre-charging systems bring the engine oil pressure up to operating pressures before you start the engine. Having oil pressure prior to starting the engine lubricates the heads, valves, etc. This helps in a big way to alleviate engine wear.

As far as synthetic versus dyno, if your engine doesn't leak much, I believe synthetic is the way to go. There are several top notch synthetic oils on the market (check out bobistheoilguy forum for more information).
I always change it hot. A couple of times I have gotten distracted and went close to 10,000 on synthetic. I’d prefer not to do that, but there was no obvious downside, of course that sort of damage can be small and incremental. A lot like starting your engine 1000 times with no oil pressure for the first X number of seconds. That’s an interesting device you speak of, I’m going to research that.
__________________
1986 300SDL, 362K
1984 300D, 138K
Reply With Quote