Quote:
Originally Posted by engatwork
Dealer parts guy is telling me his techs are telling him that you have to have some kind of $2500 ultrasonic tool to set level on the 715 tranny. Has anyone done a transmission service on one of these. Is there a way to get to the correct level without having the ultrasonic tool?
tia
|
We probably do a couple of these a day. It certainly isn't rocket science, but you'll need the pump to fill from the bottom and the one time use pan bolts. We use our xentrys to pull up the trans oil temp and drain it at 35 to 40 degrees C. until the flow just starts to cavitate. I've even gotten lazy a few times and just used an infrared thermometer gun on the pan, but only after knowing what the temp is on the pan in relationship to what the actual oil temp value is.