|
Do you know how to calibrate ( check ) you meter for continuity? If you touch the chassis, does it bleep? If it does then the switches are open circuit.
Pressure switch seldom go bad. So it is likely freon is low or almost empty. Get professional help and tell him to check for pressure and leak.
BTW: when you wrote you jump the leads, what do you mean? You jumped the compressor to make it run or you jump the low pressure switch? When you jumped the 'leads', how long? Normally jumping the leads, compressor leads, is okay if you are confident freon is ok. If you jump the low pressure switch then it is for a short time only or else the compressor could be damaged.
|