Quote:
Originally Posted by UncleHarv
This is an old thread but I'm hoping someone is still out there. I am having this same issue with the front calipers not bleeding on my '83 300d. Replaced the master cylinder and bled the rear brakes the conventional 2 person way. Got to the front, can't get anything, crack open the bleeder and the pedal doesn't move, no fluid flow, my head spinning. I saw that the starter of this thread managed to get theirs to work, I am desperate for help!
|
There is a divider wall between the front and back inside of the master brake fluid tank. Sometimes people don't put enough brake fluid in to fill both chambers inside of brake fluid tank.
Remove the bleeder screw and see if the passage inside of the screw is plugged with rust or dirt.