Had the relay out. Had ohm resistance readings from #15 pin to all the others and from #31 to all the others however I could not get the relay to "click when power was applied to #15 and 31 or 15 and KL. If I put the relay back in it's socket with the N29 out (it's at a local electronics shop for a looksee) the fuse does not blow when the key is on and blower and AC on full although nothing's working like the blower etc since the N29 is out. There is an audible click when the key's turned coming from one of the relays in the glovebox / dash but haven't a clue if it's actually this one or not. Thoughts?