joe p,

According to the manual I've got, the crank sensor (green coax cable plugged into the ign.module) should read 730-910 Ohms and mine measures 922 Ohms. Is this enough to cause a failure?

Also, is the "crank sensor" the same as the "reference sensor" listed in FastLane: "Reference Sensor - Speed - Located at front crank pulley. Optional with 002 153 22 28"? It lists for about $64.
It lists one at the crank pulley and one at the flywheel. Does my car have both or just one of these?

Thanks,

Gary