|
Jassper,
The alarm is a black box under the passenger footwell. Remove both matts and then the black metal cover and you'll see it. In many cars, the alarm will say "Becker" on it. It is to the left of where the red plug is. You'll see that the wires will also run down the right side of the vehicle through a black wire box. this is where you can follow the wire and cut from.
The window closing feature is handled by the convenience feature module which is underneath the rear seat. So, that is different than the alarm... although they do work together somehow.
Again, I'm not 100% sure... but you'll need to experiment to see if the arm wire cut will affect the window feature. Since you seem handy with an iron, should not be a problem.
|