|
Willy, just came across your . . .
post and thought I'd reply so as to see what happens.
Just be careful when you plug in the "TEST" lead: no shakey hands needed!!
The instructions apply for all pins being tested: 2 - 4 secs to "interrogate" and 7 - 9 secs to "clear" codes. Remember that you need to clear EACH code: so after reading the codes and writing them down, you must go back and start the re-read cycle but this time resetting EACH one individually by holding the pb down for 7 - 9 secs within 10secs after reading the DTC. Clear??
__________________
Regards . . . . JimF
-------------------
'94 S500 Cpe
Visit my Mercedes Web Page
|