Here's what my DTC Manual says for your DTCs.

Pin 6: ABS
13 - Brake Lamp Switch
25 - Left front vehicle speed sensors
26 - Right front vehicle speed sensors

Pin 7: EA
7 - CAN data bus signal from EA, ABS, LH-SFI control module faulty
11- Closed Throttle recognition signal to engine control module, LH-SFI. Fuel safety shut-off to engine control module, LH-SFI

Pin 8: Base Module
9 - Voltage supply for LH-SFI control module interrupted
10 - Same as above plus voltage supply for fuel-injectors interrupted
11 - Voltage supply for accessory equipment control module interrupted.
12 - Voltage supply for ABS or ABS/ASR or ASD control modules interrupted.
13 - NOT USED ???

Pin 30: SRS
4 - Right front ETR squib

Interesting codes! I quess you had no codes in the other modules since you didn't post any other module?

The SRS is a DIGITAL module so surprised you got codes from it.

Convience Features are reserved for the '140' car, so don't know what that pin is??? Are you sure it's '30'??

How's your wiring harness???

I would reset all of the codes and then see what comes back in a few days.

__________________
Regards . . . . JimF
-------------------
'94 S500 Cpe

Visit my Mercedes Web Page