well you need to get a wrench that will take off the filter housing. I picked up one that was sized to my oil filter housing, that takes a 3/4 inch socket driver. With an extension, it unscrews easily.

The oil filter housing should look like a metal cylynder somewhere in the engine compartment. On my car it is in the back towards the drivers side. behind the air box

The o Rings replace the ones on the oil filter housing, make sure you oil the o rings before you put them on. a light coating should suffice.

The copper washer is a new one for the drain plug.

From the Wisdom of Larry Bible, "change the oil hot and change it often"

Alon

------------------
'92 300CE
Metallic Black (Blue Flaked) on Parchment
Clear Corners
94-95 Tail-Lights
Debadged
Black Grille Insert
78.5k Miles

Future Upgrades:
Sportline Suspension
17" AMG Monoblocks or EVO II's
Euro Headlights
Performance Chip
AMG Exhaust

Click here to Go To My 300CE Page

[This message has been edited by Ashman (edited 11-23-2000).]