Delta used to sell a laser line miter (Norm has one), but you can't find one now. Mine is the same as John's, a Delta 10" non sliding. A workhorse, but has limits on the size of the stock as John pointed out. No problem working with "normal" or average sized crown moulding. If you are going for the Victorian look of giant sized crown, you can use normal 6" moulding and build it up with some 3" baseboard, which gives the same impression that the giant crown will.

You can get the Delta at HomeDepot or Lowes for under $200 US.

__________________
Mike Tangas
'73 280SEL 4.5 (9/72)- RIP
Only 8,173 units built from 5/71 thru 11/72

'02 CLK320 Cabriolet - wifey's mid-life crisis

2012 VW Jetta Sportwagon TDI...at least its a diesel

Non illegitemae carborundum.