cam69ss


if you look at the wiring schematic on the motors they are the same for 3 wires. the 4th wire on one of them i think it was the pass side has a 4th wire connection. but if you look it appears to actually come from one of the other 3 wires. so what i did was to reverse the motor location right to left and left to right. then i added the 4th wire from that connection block. the reversal of the motors give you the euro rotation.

the pass side bracket was an easy fit i don't remember modifying it. maybe a hole enlargement. the driver side was completely different so an extra slot here and an extra hole there and the motors were traded. turn on the power and it all worked.

i also switched wiper arms for now and colored them black to look euro.

and that was that. no new holes in the covers as i used the stock location holes. the driver side was a bit tight but i made a slot in the bracket and it did work out. i used the existing electric connectors so it was actually just a switch.

__________________
Thanks Much!
Craig

1972 350sl Red/Blk 117k
1988 420sel charcoal/Blk 140k
1987 420sel gold/tan 128k
See My Cars at:http://mysite.verizon.net/res0aytj/index.html

Pound it to fit then Paint it to match!

There is only First Place and Varying degrees of last!

Old age and deceit will overcome Youth and Enthusiasm every time!

Putting the square peg in the round hole is not hard... IF you do it fast enough!

Old enough to know better but stupid enough to do it anyway!