I have done the switch twice (616) and two days sounds OK to me. Last time I used an impact wrench where I could, like the flex coupling, that helped alot (jack up ONE side of the car so you can turn it). Have one of those spreader bars that you can tip the engine & tranny with. One problem I had both times is that the oil pressure gauge line would not turn at the filter housing. The plastic line was froze to the brass fitting so I just chopped it. a $50.00 mistake. Next time I took the instrement panel out and had my wife turn the line...dah:p

__________________


1985 Euro 240D 5 spd 140K
1979 240D 5 spd, 40K on engine rebuild
1994 Dodge/Cummins, 5 spd, 121K
1964 Allice Chalmers D15 tractor
2014 Kubota L3800 tractor
1964 VW bug

"Lifes too short to drive a boring car"