View Single Post
  #4  
Old 10-20-2003, 03:16 PM
Ken300D Ken300D is offline
Registered Diesel Burner
 
Join Date: Aug 2001
Location: Northern Virginia
Posts: 2,911
If you have the rack dampener pin screwed in too far, it won't run smoothly when cold. I had this happen when putting in the newer pin - car ran perfectly when warm but would "lope" and sputter on a cold startup. The cause and effect was obvious because that was the only thing I had done.

So, I backed it out about a turn and now its great starting and running hot or cold.

Ken300D
__________________
--------------------------
1982 300D at 351K miles
1984 300SD at 217K miles
1987 300D at 370K miles
Reply With Quote