|
Should be 115nm.
BTW, you don't need to remove the calipers to replace the pads. Take a look at the DIY or the Featured Cars tabs at the top of the page, there is a pretty good how-to for pad replacement. You should only have to pull the calipers if you are also replacing the rotors.
__________________
Mike Tangas
'73 280SEL 4.5 (9/72)- RIP
Only 8,173 units built from 5/71 thru 11/72
'02 CLK320 Cabriolet - wifey's mid-life crisis
2012 VW Jetta Sportwagon TDI...at least its a diesel
Non illegitemae carborundum.
|