View Single Post
  #8  
Old 01-02-2001, 06:12 PM
Aaron's Avatar
Aaron Aaron is offline
Moderator
 
Join Date: Aug 1999
Location: Cincinnati, Ohio
Posts: 1,940
If dampener bolt is backed out too far



....It will cause a rough idle. You have to turn it in 1/4 turn or less at a time, give the engine gas, then let off and at the point when the engine doesn't stumble when you let go of the throttle that's where you want to tighten the jam nut. It takes some time and a good ear, but you'll get it!
__________________
Regards,
Aaron
Reply With Quote