Thanks for the link - I will take some time to look over the site. I kind of wish I paid more attention in my college physics classes now.

Do you remeber which wires from the car were spliced into? This is what Bulldog gave me:

12 VOLTS CONSTANT = RED @IGN HARNESS
IGNITION 1= PNK/BLK @IGN HARNESS
IGNITION 2 = PNK/GRN @IGN HARNESS
STARTER = VIOLET @IGN HARNESS
PARKING LIGHTS = GRY/WHT(+) @HEADLIGHT SWITCH
DOMELIGHT SEE NOTES SEE NOTES
PWR DOOR LOCK= BLUE @DRV KICK PANEL
PWR DOOR UNLOCK SINGLE WIRE SYSTEM @DRV KICK PANEL
TACH SENSOR = BLK @ COIL

I know I need to make a relay for the door locks which is probably the easy part. Looking at the ignition harness, there is at least three violet wires, one maybe 12 or 14 gauge and then 2 that are lighter gauge. I am guessing I want the heavier gauge one. If you have any addvice on the colors above or what wire I want when there are more then one to choose from I would appreciate it.

Thanks

Dave